Regulations on the supervision and administration

2022-07-02
  • Detail

Regulations on the supervision and administration of civil nuclear safety equipment the regulations on the supervision and administration of civil nuclear safety equipment, which was adopted at the 183rd executive meeting of the State Council on July 4, 2007, is hereby promulgated and shall enter into force as of January 1, 2008

Article 1 These Regulations are formulated to strengthen the supervision and administration of civil nuclear safety equipment, ensure the safe operation of civil nuclear facilities, prevent nuclear accidents, protect the health of staff and the public, protect the environment and promote the smooth development of the nuclear energy industry

Article 2 the civil nuclear safety equipment mentioned in these Regulations refers to the equipment used in civil nuclear facilities to perform nuclear safety functions, including nuclear safety mechanical equipment and nuclear safety electrical equipment

The catalogue of civil nuclear safety equipment shall be formulated and published by the nuclear safety regulatory authority under the State Council in consultation with relevant departments under the State Council

Article 3 These Regulations shall apply to the design, manufacture, installation and nondestructive testing of civil nuclear safety equipment

the maintenance activities for poor contact of electronic components when the civil nuclear safety equipment is transported from the site of civil nuclear facilities shall be subject to the relevant provisions on the manufacturing activities of civil nuclear safety equipment

Article 4 the nuclear safety regulatory authority under the State Council shall supervise and administer the design, manufacture, installation and nondestructive testing of civil nuclear safety equipment

the competent department of the nuclear industry under the State Council and other relevant departments shall be responsible for relevant work in accordance with the division of responsibilities stipulated in these regulations and the State Council

Article 5 the design, manufacturing, installation and non-destructive testing units of civil nuclear safety equipment shall establish and improve systems, strengthen quality management, and take full responsibility for the design, manufacturing, installation and non-destructive testing activities of civil nuclear safety equipment they are engaged in

the operation unit of civil nuclear facilities shall inspect, test, inspect and maintain the civil nuclear safety equipment in service, and bear full responsibility for the use and operation safety of the civil nuclear safety equipment

Article 6 the design, manufacture, installation and nondestructive testing of civil nuclear safety equipment shall comply with the relevant industrial policies of the state

The State encourages scientific and technological research on the design, manufacture, installation and nondestructive testing of civil nuclear safety equipment to improve the safety level

Article 7 Any unit or individual shall have the right to report to the nuclear safety regulatory authority of the State Council any act in violation of the provisions of these regulations. Upon receiving the report, the nuclear safety regulatory authority under the State Council shall promptly investigate and handle it and keep it confidential for the informant

Chapter II standards

Article 8 the standards for civil nuclear safety equipment are the technical basis for the design, manufacturing, installation and nondestructive testing activities of civil nuclear safety equipment in the utilization of electric vehicle range extenders, which also have attractive market prospects

Article 9 the State shall establish and improve a standard system for civil nuclear safety equipment. Formulate standards for civil nuclear safety equipment, It should be fully considered that one thing yinmu is currently doing is "making movies"—— "I want to make a film about the technical development and use requirements of safety equipment, so as to be safe, reliable, technologically mature and economically reasonable in combination with China's industrial foundation and technical level.

standards for civil nuclear safety equipment include national standards, industrial standards and enterprise standards.

Article 10 national standards for civil nuclear safety equipment involving basic principles and technical requirements of nuclear safety shall be formulated by the nuclear safety regulatory department of the State Council and approved by the State Council Jointly issued by the standardization authority of the State Council and the nuclear safety regulatory authority of the State Council; Other national standards for civil nuclear safety equipment shall be drafted by the competent nuclear industry department under the State Council, approved by the nuclear safety regulatory department under the State Council, and issued by the competent standardization department under the State Council

industrial standards for civil nuclear safety equipment shall be drafted by the competent nuclear industry department of the State Council, approved by the nuclear safety regulatory department of the State Council, issued by the competent nuclear industry department of the State Council, and reported to the competent standardization department of the State Council for the record

in formulating national and industrial standards for civil nuclear safety equipment, the opinions of relevant departments and experts shall be fully listened to

Article 11 where no corresponding national and industrial standards have been formulated, the design, manufacturing, installation and nondestructive testing units of civil nuclear safety equipment shall adopt the standards recognized by the nuclear safety regulatory authority under the State Council

Article 12 units engaged in the design, manufacture, installation and nondestructive testing of civil nuclear safety equipment shall apply for licenses in accordance with the provisions of these regulations

Article 13 An entity applying for a license for the design, manufacture, installation or nondestructive testing of civil nuclear safety equipment shall meet the following conditions:

(1) it shall have the status of a legal person

(2) having a work performance related to or similar to the activities to be engaged in, and more than 5 years

(3) having professional and technical personnel who are suitable for the proposed activities and have passed the examination, among which the professional and technical personnel engaged in the welding and nondestructive testing of civil nuclear safety equipment shall obtain the corresponding qualification certificates

(4) having workplaces, facilities and equipment suitable for the proposed activities

(V) have a sound management system, a sound quality assurance system, and a quality assurance program that conforms to the provisions on nuclear safety supervision and management

the unit applying for the manufacturing license or installation license of civil nuclear safety equipment shall also make representative simulation pieces

Article 14 An entity applying for a license for the design, manufacture, installation or nondestructive testing of civil nuclear safety equipment shall submit a written application to the nuclear safety regulatory authority under the State Council and submit certification materials that meet the conditions specified in Article 13 of these regulations

Article 15 the nuclear safety regulatory authority under the State Council shall complete the examination within 45 working days from the date of accepting the application, and issue a license to those who meet the conditions and make an announcement; If the applicant fails to meet the requirements, it shall notify the applicant in writing and explain the reasons

during the review, the nuclear safety regulatory authority under the State Council shall organize experts to conduct technical review and solicit opinions from the competent nuclear industry department under the State Council and other relevant departments. The time required for technical review shall not be counted within the time limit specified in the preceding paragraph

Article 16 the license for the design, manufacture, installation and nondestructive testing of civil nuclear safety equipment shall contain the following contents:

(1) name, address and legal representative of the unit

Copyright © 2011 JIN SHI